Congratulations! Your order qualifies for free shipping YOU ARE $50 AWAY FROM FREE SHIPPING

FREE U.S. SHIPPING OVER $50

15% OFF ADJUSTABLE CHAINS CODE: ADJ15

Cart 0

Congratulations! Your order qualifies for free shipping You are $50 away from free shipping.
Sorry, looks like we don't have enough of this product.

Pair with
Is this a gift?
Discount code
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Subtotal Free
View cart
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty

The Adjustable Chain Blog Grace Blooms Adjustable Chains

2 Ways to Fasten a Necklace When You Can't Reach the Clasp

Kim Davis Kim Davis Grace Blooms Founder · 13 min read
2 Ways to Fasten a Necklace When You Can't Reach the Clasp

A stubborn clasp doesn’t have to keep you from wearing your necklace. If you’re wondering what to do when you can't fasten a necklace, start by identifying the difficulty: a sliding knot can adjust a cord necklace, while an adjustable chain that slips over your head can avoid fastening a clasp behind your neck.

I know how frustrating it can be to hold a chain in place while trying to connect a tiny clasp behind your neck. The fix can be simpler than changing how you get dressed. On chains 24 inches and longer, you can slip the necklace over your head with its standard lobster clasp closed, then slide the adjusting gasket to change the length.

I’m Kim Davis, co-founder of Grace Blooms and resident stylist. Here are two practical options: using a sliding knot on a cord necklace, or choosing an adjustable chain you can slip over your head. Each works differently, so consider which best suits the necklace you want to wear and the step you find difficult.

1. Sliding knots for adjustable cord necklaces

A sliding knot gives a cord necklace an adjustable closure without a small clasp behind your neck. It works with cotton, silk, and leather cords. Choose this approach when the cord suits the pendant and you’re comfortable adjusting knots at the front. For example, a simple cord with a lightweight pendant can loosen to go over your head, then tighten to your preferred length.

To make a sliding-knot closure, overlap the cord ends so they point in opposite directions. Use one end to tie a loop around the other cord, then repeat with the opposite end around the first cord. Pull each knot snug, leaving the center cords free to slide. Trim excess only after testing the adjustment. The knots should move when you pull the ends, then hold the necklace at your chosen length.

Test the fit over a soft surface before wearing it. Slide the knots apart to widen the necklace, place it over your head, then pull the cord ends to bring the knots closer. Check that both knots move smoothly and stay secure against your neck. If a cord frays, feels too slippery, or won’t hold the knot, this closure may not suit it. Cord texture and knot size affect how easily it slides.

To put on a necklace using a mirror or phone camera, stand in front of a mirror or position your phone camera behind you. Keep the necklace ends near your shoulders, then watch the clasp or knots on the screen as you bring them together. A steady phone stand frees both hands, while a bright, uncluttered background makes the cord easier to see.

If your hands don’t cooperate the way they used to, choose a cord with knots you can grip comfortably. Rest your elbows on a table, work over a soft cloth, and move one knot at a time instead of pinching both ends in the air. For a necklace with a clasp, a larger clasp or helper tool can offer more to hold. A sliding knot may be simpler if you’d rather adjust the necklace from the front.

If you have a pacemaker or an ICD, choose a nonmagnetic fastening option. Section 2 explains the alternative for putting on a necklace without opening its clasp.

Sliding knots suit adjustable cord necklaces, but they won’t change a chain necklace’s closure. If you’re deciding where a necklace should sit, my necklace length guide can help you picture the fit before choosing a style. For a finished cord necklace, test the knots gently each time you adjust them, and keep the ends long enough to pull without yanking the pendant.

2. Using finished or loose chain with a clasp

A finished chain already has its clasp attached, so you can focus on fastening it rather than assembling the necklace. A loose chain gives you more choice about its closure, but it needs a clasp fitted securely to both ends. Either way, look for a shape you can see and grip. Even a properly working tiny clasp can be difficult to manage.

A larger lobster clasp may be easier to hold than a very small one. A magnetic clasp can also help when fastening and unfastening is difficult: bring the ends together to connect them, without guiding a narrow latch into a small ring. The best fit depends on the clasp design, chain ends, and how comfortably you can bring both sides together.

A magnetic clasp converter with loops attaches to a necklace’s existing end rings. Open the necklace clasp, connect one converter loop to each end, and close the original clasp securely. The converter then joins the two sides magnetically when you bring them together. Before wearing the necklace, make sure both loops are attached and the converter closes fully. If you have a pacemaker or an ICD, choose an adjustable chain you can slip over your head instead; magnets can interfere with implanted cardiac devices.

With a loose chain, the end fittings help determine which closure will work. A magnetic closure connects the two ends, while a lobster clasp can be opened when you want to change pendants or charms. Set the chain on a soft surface and check that each clasp end meets its ring cleanly. If a pendant shifts or pulls on the chain, inspect the connection again before putting it on.

Have a jeweler assess a clasp that no longer closes securely, has a stuck moving gate, or connects to an end ring that has opened or become misshapen. These problems can let the necklace come apart. If the clasp works but is difficult for you to operate, a different closure may address the problem better than repairing the existing one. The clasp, chain, and attachment points all affect which change makes sense.

Think about the specific step you want to simplify. If holding a small ring steady is difficult, a converter changes how the ends meet. If you’d rather avoid opening a clasp while dressing, an adjustable chain designed to slip over your head may suit your routine better. Consider the closure alongside how you put on and wear the necklace.

A toggle clasp is another option, but it needs enough weight in the design to create resistance, or it may come undone. Check that the style suits the chain and feels manageable to fasten.

What to do when you can't fasten a necklace

3. How to fasten a necklace clasp by yourself

If you’re deciding what to do when you can't fasten a necklace, try bringing the clasp ends together in front of you. Once the clasp is closed, gently rotate the chain so the pendant returns to the center of your chest. I use this approach with a lobster clasp or a C clasp when reaching behind my neck feels awkward. Go slowly, especially with a delicate chain that can twist or catch in your hair.

  1. Hold the necklace with its pendant at the front and the clasp ends near your collarbone.
  2. Bring the clasp and its ring together in front of your body. Rest your elbows on a table if that steadies your hands.
  3. For a lobster clasp, hold the ring securely, press the small lever, and guide the ring into the opening. Release the lever only after the ring sits inside.
  4. For a C clasp, place the ring into the open curve, then close the clasp’s hook around it.
  5. Check that the connection is closed, then gently rotate the necklace until the pendant sits in front again.

A mirror can help you check the final position, but this front-fastening method keeps the small parts in view during the fiddly step. Keep the chain slack while rotating it. Pulling it tight can tug at the clasp or twist the links. If the pendant catches, stop and straighten the chain before moving it farther around your neck.

Knowing what to do when you can't fasten a necklace starts with identifying which movement is hardest. If your hands don’t cooperate the way they used to, sit at a table and place a soft cloth underneath. Support your forearms on the surface. The cloth helps keep the necklace from sliding away, and supported arms can make it easier to hold the ring steady. Try using the pads of your fingers instead of pinching with your fingertips.

Check the clasp before putting the necklace on. Open and close a lobster clasp while it’s off your neck, and notice whether its lever moves freely. For a C clasp, check that the hook retains its shape and holds the ring securely. If either closure feels stuck or fails to stay shut, stop wearing the necklace until the clasp is repaired or replaced. A closure that looks shut but opens with a light tug can let the necklace fall.

This method works best when the chain turns freely and the pendant doesn’t snag. If the necklace resists rotating, take it off and fasten it again rather than pulling harder. A different closure style may make dressing simpler, especially if repeated reaching and pinching are uncomfortable.

4. How to use a necklace clasp helper tool

A necklace clasp helper gives you a steadier way to hold one end while you connect the other. Many designs have a handle with a small hook or clip that catches a chain’s end ring. This support can keep the ring in place while your fingers operate a lobster clasp. For example, if the ring keeps slipping as you press the clasp lever, the helper can steady it.

Start with the necklace off your neck and place it on a soft, flat surface. Identify the tool’s hook or clip, then attach it to the chain end you want to hold. Keep the clasp and ring visible. If the tool has a handle, hold it in your less-used hand and leave your other hand free to open the clasp.

  1. Lay the necklace flat, with the clasp and end ring close together.
  2. Attach the helper to the end ring or chain link, following the tool’s design.
  3. Hold the handle steady, then use your free hand to press the lobster clasp lever.
  4. Guide the ring into the clasp opening. Release the lever after the ring is seated.
  5. Remove the helper and gently check that the clasp stays closed.

For a C clasp, use the tool to steady the ring while you guide it into the open curve. Check that the hook closes around the ring before removing the helper. A clasp helper can make alignment easier, but it won’t fix a clasp that sticks, bends, or fails to stay shut. Set aside a necklace with a faulty closure until it’s repaired.

If your hands don’t cooperate the way they used to, set the tool and necklace on a table rather than holding both in the air. Rest your forearms on the surface and work with the chain slack. That setup reduces unwanted movement. A light-colored cloth can also make a small clasp easier to see against the background.

Try the helper on a necklace you can handle comfortably before using it with a delicate chain. Make sure its hook or clip holds the end ring without squeezing or scraping the links. Don’t pull hard if the tool slips. Reposition it, then align the clasp and ring again. If the tool doesn’t fit your necklace’s end ring, front-fastening or a different closure may be easier.

After fastening, check the connection with a gentle tug over the table. Store the helper beside your jewelry so it’s ready the next time a small clasp is difficult to manage.

5. How to fasten a necklace with a paper clip or safety pin

A paper clip or safety pin can act as a temporary handle for a necklace end ring. It gives your fingers a larger place to hold while you connect a lobster clasp. Use either aid only to steady the jewelry. Don’t leave it attached as part of the necklace, since it can snag clothing or scratch the chain.

Choose a smooth, sturdy paper clip that won’t catch on the chain. Keep the necklace flat on a table, then slide one curved end through the end ring. Hold the paper clip’s larger loop while your other hand opens the lobster clasp. Guide the ring into the clasp, release its lever, then carefully remove the paper clip. A paper clip can help steady the ring, but it won’t make a damaged clasp secure.

A safety pin can also provide a grip, but its sharp point needs extra care. Open it away from your skin, pass the curved section through the necklace’s end ring, and close the pin completely. Hold the pin by its closed body while you connect the clasp. Keep the point secured inside its clasp, and don’t pin the necklace to your skin or clothing. Remove the safety pin after fastening.

Try these steps over a soft cloth, with the clasp and ring in clear view:

  1. Lay the necklace flat and identify the end ring you need to hold.
  2. Thread a smooth paper clip or closed safety pin through that ring.
  3. Hold the aid steady, open the lobster clasp, and guide the ring into its opening.
  4. Release the clasp lever, remove the aid, and check that the clasp stays shut.

If your hands don’t cooperate the way they used to, rest your forearms on the table. Keep the chain slack and move slowly so the paper clip or pin doesn’t pull against delicate links. A bright cloth underneath can make the small ring easier to see. Stop if the chain twists or the aid slips. Reposition everything before trying again.

These household items can help in a pinch, but they’re improvised tools. A bent paper clip may have a rough edge, and an open safety pin can prick your finger or catch a link. Don’t force either aid through a tiny ring. If you often need help holding your necklace, choose a closure or dressing method that feels easier to manage every day. Consider whether a different chain length or clasp style better suits your routine.

For a necklace made with thread, a knot cover offers another way to finish the fastening. Knot covers conceal a thread knot inside a cup that closes with pliers. The knot stays out of view, while the cup provides a finished end for the thread. Use pliers carefully to close the cover around the knot.

For a cord necklace that needs an adjustable fastening, consider a sliding knot. It works with cotton, silk, and leather cords. Its suitability depends on the cord material, so use this approach for those cord types rather than to connect a clasp to a chain.

Adjustable Chains by Grace Blooms: Adjustable Necklace Extenders

Adjustable Chains by Grace Blooms offers adjustable necklaces for days when reaching a clasp feels difficult. On chains 24 inches and longer, you can slip the necklace over your head with its standard lobster clasp closed, then slide the adjusting gasket to set the length at 14, 16, 18, or 20 inches. The clasp remains useful for changing pendants and charms.

An adjustable necklace extender serves a different need: it adds length to a necklace you already own. If fastening the clasp is your main challenge, an adjustable chain that slips over your head may be more useful because you can put it on without opening the clasp. Choose based on whether you need extra length or an easier way to get dressed.

Contact Adjustable Chains by Grace Blooms if you’d like help choosing between an adjustable necklace and an extender.

Choose a necklace routine that feels like yours

If you’re still weighing what to do when you can’t fasten a necklace, think about the moment that gives you the most trouble. Is it holding the chain steady, reaching behind your neck, or working a tiny clasp? Let that answer guide your next choice. A temporary helper can get you through one dressing moment. A different necklace style may better suit how you want to get ready each day.

At Adjustable Chains by Grace Blooms, I offer Adjustable Chains, Adjustable Necklace Extenders, and Adjustable Bracelets. Each option answers a different jewelry need, so focus on the piece you’ll reach for and the fastening step you’d like to simplify. You can choose a change that fits your routine, rather than forcing your hands to manage a closure that keeps frustrating you.

Keep wearing the jewelry you love. A small change can make getting dressed feel like your own again.

Disclaimer

*About magnetic clasps: Magnets can interfere with implanted cardiac devices. If you have a pacemaker or an ICD, choose an adjustable chain that you can slip over your head rather than a magnetic clasp.